Wheel sizes

[Huds1_2]

Seen some wheels I want and have searched prior to this post , wheels are
ET (Front 8.5J) +45mm.

ET (Rear 10J) +35mm.

Tyres sizes
225/35 ZR19 Tyres.

265/30 ZR19 Tyres

Stock body , hsd coil overs not yet fitted
Any help appreciated

 

[JDK]

Can you get them in 17s or 18s?

 

[Huds1_2]

18’s only available in 8.5 inch alloy

 

[Nas80]

19s look massive on an fd

 

[snoopios]

I assume you're wanting advice on them fitting?

I've got 18 x 11s on mine with 285 / 30 tyres and they catch on the wheel arch liners and also on the rear part of the inner wheel arch on the wing so I've had to either bend (when I had metal wings) or cut (with my new fibreglass ones) the wing to stop the wheel from catching.

I'd suggest finding some wheel / tyre combination that fits without any rub / cutting required then plugging the numbers into this: https://www.willtheyfit.com/

Then you'd be able to see (roughly) what your wheels are going to do.

 

[MILLION]

I've got this excel spread sheet specifically for the FD. You can plug in different options and check clearances.

Stolen from "that forum" across the pond

ping me and i'll email it over if you like

 

[Dowx]

I've got this excel spread sheet specifically for the FD. You can plug in different options and check clearances.

Stolen from "that forum" across the pond

ping me and i'll email it over if you like

View attachment 23599

Could you pm me the spreadsheet? Does it give limits.like if I have 18x9.5 the offset is 50 but will 35 fit,etc

 

[MILLION]

it gives clearance to the outer and arch lip and inner (shock shaft i believe it is?).

 

[Ceylon]

That's the spreadsheet Jimlab made, blast from the past!

I've attached a copy for reference.

 

[JoeLanger]

Or just Google it: www.willtheyfit.com