CORDLESS IMPACT WRENCH

[fischer]

Thinking of getting an Impact Wrench to assist with removing wheel nuts.etc

Anyone found one that they could recommend

Cheers

 

[Ifty]

makita 1002z
dewalt 889n
INGERSOLL RAND (Make Snap On)

I have dewalt as most cost effective....

 

[initialDean]

I have a cheapo Corded one from ebay... works great think it was like £50 ish

 

[Paulm]

I have snapon cordless, picked it uo used from the local snapon guy, its decent. The mac tools one kicks its pants though.
All depends on how much you want to spend and if you want air, battery or mains.

 

[JoeLanger]

I've got a dewalt one DCF899HN it's a beast 1000NM 3 speeds, always use on speed 1 or 2. Not struggled with anything yet.

I did have a Clarke one but sold it as it was shit and couldn't remove much of what I tried it on. Don't buy a cheap one. There are other decent manufacturers out there just go with whichever to keep all the batteries the same, my dad has a Makita one which is just as good

 

[Liamc111]

Another vote for the dewalt

 

[Tangelos]

X3 for the Dewalt. Things a beast and the only bolts it couldn’t remove were ones that I needed to use a torque multiplier for

 

[JoeLanger]

yeah that one think i paid £135 naked

machine mart one was £70 but this one is twice as good

 

[west-wot]

makita 1002z
dewalt 889n
INGERSOLL RAND (Make Snap On)

I have dewalt as most cost effective....

I use the Makita and love it

 

[Mazdawho]

If you’re not a professional get the dewalt.

 

[Jit]

Ive got the Makita. Its a beast. Wouldnt swap it for any other

 

[NoisyNelly]

Makita DTW285Z. great bit of kit.

 

[4packet]

Depends how much torque you need. If just wheel nuts and normal fixings then I recommend the Makita DTW285Z. It's a light/compact unit, so can use it in tight spaces and 400Nm is enough to remove wheel nuts. 3 different torque settings and has a mode which will stop the tool once it sees a drop in torque to avoid throwing the nut across the garage.

You really need to choose your brand of cordless tools and stick with it. Batteries and chargers are expensive.

 

[Dread]

I have a Milwaukee one which is an absolute beast! Loads better than the Snap-On equivalent for about half the price.

I believe it's this one.

M18 FUEL™ ONE-KEY™ ½″ High Torque Impact Wrench With Friction Ring | Cordless Impact Wrenches | Milwaukee Tool UK

M18 FUEL™ ONE-KEY™ ½″ high torque impact wrench with friction ring. The M18 FUEL™ high torque impact wrench with ONE-KEY™ technology delivers 1356 Nm of fastening torque in a compact size of 213 mm, which gives more access in tight spaces. The 4 -Mode DRIVE CONTROL allows the user to shift into...

uk.milwaukeetool.eu

 

[JoeLanger]

A lot of tool manufacturers are the same, for example I think the milwake and dewalt are the same unit in different colours, batteries fit

 

[Paulm]

I have a Milwaukee one which is an absolute beast! Loads better than the Snap-On equivalent for about half the price.

I believe it's this one.

M18 FUEL™ ONE-KEY™ ½″ High Torque Impact Wrench With Friction Ring | Cordless Impact Wrenches | Milwaukee Tool UK

M18 FUEL™ ONE-KEY™ ½″ high torque impact wrench with friction ring. The M18 FUEL™ high torque impact wrench with ONE-KEY™ technology delivers 1356 Nm of fastening torque in a compact size of 213 mm, which gives more access in tight spaces. The 4 -Mode DRIVE CONTROL allows the user to shift into...

uk.milwaukeetool.eu

I have snapon, and where they say there is a difference, that means it's twice as much and half as good as the dewalt, mac or milwalkee ones.

 

[fischer]

Thanks all

Plenty to look at now.

 

[shaunwil]

Always been impressed watching what bad obsession use on project binky, don't think they are cheap though.

 

[Adam]

A lot of tool manufacturers are the same, for example I think the milwake and dewalt are the same unit in different colours, batteries fit

Mac and Dewalt. Mac is double the price. Same gun. Cunts.( yeah I bought the Mac)

 

[Dread]

Mac and Dewalt. Mac is double the price. Same gun. Cunts.( yeah I bought the Mac)