Wheel fitment

[Drgray]

As title, I'm just querying whether a set of wheels 18x9.5 et35 square setup will fit stock body fd? They have 245/45/18 tyres on too.
I don't want to roll the arches for fitment either.

If anyone could let me know or have this setup without modification of the wheel arch that would be appreciated.

Thanks

 

[JoeLanger]

Will they fit .com

Check the measurements vs your current wheels on there.

I have 17x9 et30 255 40 17. They fit nice on the rear with arch roll. Fit OK on the front with arch roll, but I'd prefer it to be et35 just to get more clearance for rubbing etc

 

[Drgray]

Looks like the front will stick out of the arch by 5mm

 

[JoeLanger]

5mm would be nothing compared to standard set of wheels. Have you measured it?

TBH I would have thought 18x9.5 et35 would fit ok with 245 tyres

 

[rx_dreamer]

I am not sure if this is helpful, but I think (why it's probably not very helpful) that my offset is 38mm on 9.5 front, 245 tyre, and its (in my humble and not very stance opinion) borderline.

Could see it getting an MOT moan. No Arch mods included!

 

[marco]

This is 245 35 18 on a et20 9j. Haven't done any alignment etc, so camber might bring the top in a bit. But fully expecting to have to roll arches as a minimum. Tbh I think you might have clearance issues with a 45 profile tyre- I test fitted one and it was uncomfortably close to the headlights.

 

[SullyKP]

Managed to get 265 35 18 tyres on et12 10j, and fit under stock arches with a roll/flare