Here we go

[RandomVillager]

Yeh they were in a box of bits that came with the car I'll probably just sell them on

 

[Paulm]

What ECU are you running?
Also worth checking the impedence of the injectors they should be high impedence (if they are low then yoiu should have resistors fitted to the loom)
I'm guessing the fuel rails are Raduim or similar looking at the photos, can you read the static fuel pressure?
At the end of the day it's the same as any engine, do you have spark, fuel delivery, or are your flooded, pull the plugs, then move to does the engine have compression.
The big problem is it hasn't run in a long time, so why was it parked up? did it run when it was parked up, or has someone started something and not finished what they were doing.
I put mine away for 7 years, put a new battery on it, oiled the rota faces (spun it over by hand a few times to make sure the apex seals were oiled up and the chuffs sounded equal), and it started 2nd turn of the key, on the old fuel.

 

[RandomVillager]

Radium upper and lower 42ish psi static fuel pressure.

How do I check if there high/low impedance?

I know it's not ideal but it has Apexi power FC.

Previous owner had it for 15 years got parked after 3 for a rebuild there is a lot of info and history missing for the car ie there isn't anything.

Don't even know who rebuilt the motor 12 year ago.

Was laid up due to ill health apparently.

Loads of stuff missing/broken from a garage that was ment to of been doing the work.

It had defi gauge's semi wired in but no actual gauges they were missing but the control box is there.

 

[Paulm]

I would guess they are all high, but you can google the part numbers - ID1050 etc that should tell you. If they are low then IIRC the low resistance can damage the injector drivers in the ECU.
Apexi power FC is still run by a lot of people, it just lacks modern failsafes and needs a magic box to connect it to your laptop, if you can download the manual you may be able to check if the injectors have been altered on the hand commander if you have one, I honestly cannot remember what you can pull up on them now.

 

[RandomVillager]

Cable is coming it's in Heathrow.

I have the software loaded as it's now released to the public by Apexi.

I checked on the commander it was scaled for 550 primary and 870 secondary but I didn't know if it was correct so pulled the fuel rails off.

Glad I did tho they weren't mounted correctly.

Seems to be a running theme with this car.

 

[RandomVillager]

Pulled this off the commander last month

 

[RandomVillager]

Googled the part number coming back as high impedance on the 1050cc ones the 1000s are the same so all good there.

Cheers Paul.