99 spec bumpers

[Damz]

I recall that you used to be able to order the 99 spec bumper from Mazda direct. Is that still possible?.

In fact I just realised I asked this a few years ago, checking if those options still exist.

 

[MKZ7212]

Yes as far as i know, to do it right you will need the parts below

Front Bumper Skin - F138-50-031A-AA


Bumper Reinforcement - F138-50-070B


Air guide - F138-50-A21


Under tray (splash guard) - F140-56-1B0A


Right brake duct - F138-43-63XB


Left brake duct - F138-43-64XB


Right front air skirt (chin spoiler) - F138-51-9K1B


Left front air skirt (chin spoiler) - F138-51-9L1B

 

[Satoshi-FD3]

You don't need the undertray for the conversion, you can modify the pre 99 one for the conversion if you want to, but not needed as the pre 99 car will not benefit from the modification. So just use the original splash tray.

 

[Fugglequest]

How much is just the bumper from mazda cant imagine its cheap

 

[Rikmister1]

How much is just the bumper from mazda cant imagine its cheap

Under 500 when I got one a year ago, doesn’t come with brackets although you can use them from the early spec bumper

 

[Opentraffic]

Recently purchased at £590 direct from mazda uk

 

[Damz]

Finally getting round to replacing the somewhat poor fitting 99 copy with a genuine one and wanted to check if this is correct.

Front Bumper, 17w 20p 22v 25g A3d A3f Hz Nu

Buy Mazda - Front Bumper, 17w 20p 22v 25g A3d A3f Hz Nu F1Y2-50-031 direct from Japan, 100% genuine parts shipped worldwide.

www.nengun.com

 

[Fiddy]

I bought my 99 spec from Mazda about 2 months ago for just over £500

 

[Damz]

I bought my 99 spec from Mazda about 2 months ago for just over £500

Got one ordered, £640.

 

[Archbish]

So I'm probably going to order the KBD 99 spec nose if I can arrange shipping (they want $599, and I think I can get it sorted for about $130!). I like it as it has no number plate mount, but still 99spec look. Has anyone had experience with KBD stuff?

 

[Tangelos]

Saw a post on FB yesterday about how they sag near the headlights, let me see if I can find it

So I'm probably going to order the KBD 99 spec nose if I can arrange shipping (they want $599, and I think I can get it sorted for about $130!). I like it as it has no number plate mount, but still 99spec look. Has anyone had experience with KBD stuff?

 

[Tangelos]

Some examples. If its fiberglass you can probably heat it up and flex it into place but itll take time for sure

 

[Milez]

So I'm probably going to order the KBD 99 spec nose if I can arrange shipping (they want $599, and I think I can get it sorted for about $130!). I like it as it has no number plate mount, but still 99spec look. Has anyone had experience with KBD stuff?

Did you ever order it in the end?

 

[Archbish]

Nope! Was curious about the bumper, but $500 on shipping is ridiculous!!

 

[noyzboy]

Yes as far as i know, to do it right you will need the parts below

Front Bumper Skin - F138-50-031A-AA


Bumper Reinforcement - F138-50-070B


Air guide - F138-50-A21


Under tray (splash guard) - F140-56-1B0A


Right brake duct - F138-43-63XB


Left brake duct - F138-43-64XB


Right front air skirt (chin spoiler) - F138-51-9K1B


Left front air skirt (chin spoiler) - F138-51-9L1B

Thats Brilliant info

 

[rx_dreamer]

I ordered a 99 from mazda this week

As damz £640

Might be worth asking racingbeat, the reinforcement only 1300 on there

 

[Archbish]

Front Bumper part number is now: F1Y250031
and the following are to make it attach nicely:
https://www.amayama.com/en/part/mazda/fd01501axb
https://www.amayama.com/en/part/mazda/fd01501ayb
https://www.amayama.com/en/part/mazda/fd01501b0a
https://www.amayama.com/en/part/mazda/fd01501c0a
https://www.amayama.com/en/part/mazda/fd01501d0
https://www.amayama.com/en/part/mazda/fd01501e0
https://www.amayama.com/en/part/mazda/fd01500k0a
https://www.amayama.com/en/part/mazda/fd01500k1b
https://www.amayama.com/en/part/mazda/fd01500kxa