Wheel nuts

[Simaroon]

Anyone recommend anywhere to get a decent set of internal drive nuts?

I remember years back reading stuff about staying away from anodised nuts but they seem to be all that I can find.

Don’t really care about colour or spikes and crowns and all that jazz, I just want a decent set of internal drive so I don’t keep scratching wheel paint with my wheel brace being a serious tight fit.

Thanks

Ah these a decent price? Seem pricey but don’t know what I should be paying. They’re ali but I think all internal drive will be?

https://www.ultralitewheels.com/aca...-INT-HEX-M12x1.5-BLACKx-20--1350.html#SID=153

 

[Spendyrx]

I'm sure d1spec (proper ones) are about 40 quid aren't they?

 

[JoeLanger]

I'm also interested in getting some normal nuts. I'd prefer 17mm ext. Hex drive though

 

[Simaroon]

Spline drive nuts?

https://www.driftworks.com/spline-drive-steel-wheel-nuts-with-key-6-colours-available.html

Bit cheaper than the first set i linked too

 

[Simaroon]

I'm sure d1spec (proper ones) are about 40 quid aren't they?

Aren’t they alloy ones? I’m trying to stick to steel

 

[jdmr_neil]

I'm on my second set of rays duralium ? Never paid more than about £40 for them so most likely not genuine.

Keep the wheels on fine, look decent, I'm happy.

Only got another set as i lost my locking key being a plum.

 

[Spendyrx]

Aren’t they alloy ones? I’m trying to stick to steel

No idea si, I'm only good on the kp ones

 

[tomCTR]

I'm on my second set of rays duralium ? Never paid more than about £40 for them so most likely not genuine.

Keep the wheels on fine, look decent, I'm happy.

Only got another set as i lost my locking key being a plum.

Any issues ever with these neil?

Might give these a try when I get my new wheels

 

[jdmr_neil]

Never had a issue with them Tom. Look smart, keep the wheels on. Can't expect much else tbh

 

[tomCTR]

Never had a issue with them Tom. Look smart, keep the wheels on. Can't expect much else tbh

As long as they stay on!

 

[jack.am]

Go with the Driftworks ones

 

[welshkid]

Bumping this for more recommendations, as I'm on the prowl for some to replace my oem ones

 

[NoisyNelly]

i use Muteki SR48's for my BSS wheels and their Sr48 locking versions too. Been on the car nearly a year and haven't rusted, corroded or chipped and the wheels have been on and off a few times too.

 

[welshkid]

i use Muteki SR48's for my BSS wheels and their Sr48 locking versions too. Been on the car nearly a year and haven't rusted, corroded or chipped and the wheels have been on and off a few times too.

Did you use them with your rpf01 too? (I bought yours)

 

[NoisyNelly]

Did you use them with your rpf01 too? (I bought yours)

No, I got them when I put the BBS wheels on. They will fit though, Muteki also do closed end version too if you don’t like tuner nuts.