Indicator issues

[Rikmister1]

Morning guys, can anyone help or offer advice?
Took the car out yesterday (just replaced the f110 so finally have working windows now) and noticed the left indicator does not work at all. It doesn’t show on the dash and there’s no click, also doesn’t work on the hazards but the right hand side is fine.
Does anyone have any diagrams I can look at or any tips and what to look for

 

[welshkid]

My crude translation project of the '94 JDM wiring guides. No experience of the flasher unit / wiring but i think its part-of/near the f110 so I'd take a look there first

 

[Ceylon]

It's in the f110 yes. You can remove it though and swap the one from your old unit in if they worked before. Single screw on the base and pull the board out iirc.

If your old one didn't work I'll have a spare you could buy to swap in. This board is just the flasher unit so will not affect the part that fixed your windows.

 

[Rikmister1]

It's in the f110 yes. You can remove it though and swap the one from your old unit in if they worked before. Single screw on the base and pull the board out iirc.

If your old one didn't work I'll have a spare you could buy to swap in. This board is just the flasher unit so will not affect the part that fixed your windows.

Thanks very much. My old module is away atm as I have found someone that thinks they can repair it it, will wait for it to come back and go from there. Thanks for your help